Inspired by Case Study Houses, WATG Urban Builds the First Freeform 3-D Printed Home

Photography courtesy of WATG Urban.

 claimed first prize in the 2016 Freeform Home Design Challenge, commissioned by to build the first house that combines freeform 3-D printing with conventional construction materials. Despite its futuristic contours, , as it’s called, is actually inspired by the past: Case Study Houses—but using technology those mid-century architects could only imagine. “We definitely carried the inside-outside concept through from the Case Studies,” associate vice president and design director says.

The arched profile arises not merely from aesthetics but also practicality, as the shape of the rigid printed matrix is designed to support the roof load, allowing for large open-plan living areas underneath. Floor-to-ceiling glass walls harness natural light, while a passive mechanical system enables the 900-square-foot structure to produce as much energy as it consumes.

The real celebration begins later this year with a groundbreaking in Chattanooga. Believing that architecture should coexist harmoniously with the environment, a wooded site was chosen just steps from the Tennessee River. Hurst adds, “It gives the house humanity.”

Photography courtesy of WATG Urban.

> See more from the March 2018 issue of Docservis

TRENDING ON TWITTER
about 18 minutes ago
about 26 minutes ago
about 41 minutes ago

AROUND THE WEB

look

www.budmagazin.com.ua

www.vorteleather.com.ua/c50-zhenskie_dublenki
Email
Pin